For rectangular box shaped ponds up to 3800x2900x1100mm high Volume~12KL** indicative only (see below)

Pond Liner, 1.0mm thick EPDM rubber. WRC rubber is not suitable for drinking water. The material will not break down under direct sunlight. The material can endure temperatures up to 80 degrees Celcius without risk. (Note that temperatures this extreme would not be safe for fish!).

Rubber is tough and will stretch up to 300% and still return to its original relaxed state - just like a rubber band ;-) However, remember, to get the best longevity from your Pond membrane, make every attempt to ensure the material is relaxed and sitting flush with the bottom of the hole you have dug. Refer to Southland's installation instructions for more information. We also recommend you purchase some liner underlay material (available in our store).

Specifications

• Colour = Black
• Average Thickness =1.0mm
• Expected life of WRC rubber is 50 years (assuming correct installation and maintenance)
• Actual box liner dimensions = 3800mm x 2900mm x 1100mm. (These dimensions are in millimetres)

Pond Size Estimates

The maximum recommended size of the pond is be:

• L=3800mm
• W=2900mm
• Depth = 1100mm. (These dimensions are in millimetres)

The estimated volume = 12 THOUSAND litres.

**Finish pond dimensions are indicative only. Box shaped liners may be fabricated intentionally oversized +3% to allow for potential shrinkage

*** nominal fabric thickness

Note that this material is for keeping fish and is therefore not suitable for high concentrations of chlorine for extended periods of time. Chlorine levels must be kept below 0.2ppm.